Case study · Aerospace

Military Helicopter Bearings

Extended Bearing Operation After Sudden Lubrication Loss

In comparative testing, a Dicronite® dry-lubricated M-50 steel roller bearing continued operating for 38 minutes after lubrication loss, while standard bearings failed within 3–6 minutes.

The treated bearing operated for the full test duration—more than six times the longest reported operating time of the untreated bearings.

M-50 roller bearing after lubrication loss Dicronite®-treated Operating time Standard bearings failed within 3–6 min Dicronite®-treated bearing 38 min test ended 0 10 20 30 40 min
Dicronite®-treated bearingStandard bearings
  • 38min Continued operating after lubrication loss The full test duration, with no reported failure.
  • 3–6min Standard bearings failed Under the same lubrication-loss conditions.
  • >6× Longer operation Than the longest reported time of the untreated bearings.

The challenge

Sudden lubricant loss in combat transmissions

Combat helicopter transmissions can experience sudden lubricant loss following damage from enemy fire. Extending transmission operation after lubrication loss can give the crew additional time to reach a suitable emergency landing site.

Testing evaluated whether Dicronite dry lubrication could extend bearing operation under these conditions.

What the testing evaluated

Operating time

Bearing operation after sudden lubrication loss.

More time can help the crew reach a suitable emergency landing site.

The testing

Standard bearings versus treated bearings

Standard M-50 steel roller bearings were compared with equivalent bearings treated with Dicronite dry lubrication under sudden lubrication-loss conditions.

Standard

M-50 steel roller bearings

Untreated bearings.

Dicronite®

Equivalent treated bearings

Treated with Dicronite dry lubrication.

Test parameters

Bearing material
M-50 steel
Bearing type
Roller bearing
Rotational speed
10,000 rpm at the inner race
Initial lubricant
MIL-PRF-7808 lubricant
Test condition
Sudden loss of lubrication
Performance measures
Operating time and outer-race temperature

The results

38 minutes, versus 3–6 minutes

  • Standard bearingsFailed within 3–6 minutes3–6 minfailed
  • Dicronite-treated bearingContinued operating through the full 38-minute test38 mintest ended

Each bar is the reported operation after lubrication loss, on a scale of 0 to 40 minutes. The standard bar runs to 6 minutes, the longest reported time.

The Dicronite-treated bearing completed the test without a reported failure. Its ultimate time to failure was not established because testing ended at 38 minutes.

The outcome

Supporting emergency-landing requirements

According to the supplied test summary, the extended bearing operation met the military test conditions intended to allow time for an emergency landing.

These results demonstrate performance under the reported bearing-test conditions. They do not establish a universal operating time for every helicopter transmission following lubricant loss.

Contact Dicronite Southwest

Discuss your aerospace bearing application

Contact Dicronite Southwest to discuss dry lubrication for bearings and transmission components operating under demanding conditions.

Dicronite® Southwest

Request a Dicronite® WS₂ Coating Quote

Send us your project details so we can evaluate your requirements and prepare a quote.

Sending drawings securely

Dicronite® Southwest is CMMC compliant. Please do not attach drawings to this form. Send drawings, including ITAR and CUI technical data, by email to rfq@secure.dicronitesouthwest.com. Email to this secure address is routed into our PreVeil encrypted environment.

Submit this form first so our team can add your email address, or your company's email domain, to the approved list for the secure inbox. Email from addresses that are not on the list cannot be received.

If your company already uses PreVeil, you can also send drawings to us directly through PreVeil.

Email Drawings Securely

Loading the quote form…

Thank you. Your quote request has been received.

Our team will review your project details and follow up by email.