Industries · Medical devices

Dry Lubrication for Medical Devices

Reduce Friction, Wear, and Galling in Precision Components

Dicronite® dry lubrication helps address friction and wear in medical-device components, surgical instruments, and diagnostic equipment. Its ultrathin film supports precision assemblies where smooth movement and tight mechanical tolerances are essential.

Applications include dental equipment, surgical tool pivots, guide mechanisms, and moving components within medical imaging systems.

Surgical instrument pivot Dicronite® film at the pivot Maximum thickness 0.5 µm Reported coefficient of friction as low as 0.030
Dicronite® filmInstrument
  • 0.030 Reported coefficient of friction As low as; depends on application conditions.
  • 0.5µm Maximum film thickness For close-tolerance components.
  • 7 Tests and documents listed Including ISO 10993-5 and an FDA Device Master File.

Why Dicronite®

Functional properties

  • Low friction

    A reported coefficient of friction as low as 0.030 helps reduce resistance between moving surfaces. Performance depends on application conditions.

  • Precision film thickness

    A maximum thickness of 0.5 microns supports close-tolerance components and helps address stick-slip and galling.

  • Wide temperature capability

    A reported functional range of −188°C to +538°C supports demanding operating environments.

  • Radiation stability

    Reported resistance to gamma radiation and X-rays supports evaluation for sterilization and imaging applications.

  • Medical application testing

    Biocompatibility and sterilization-related test documentation supports assessment for the intended device application.

Testing and documentation

Testing and technical documentation

Dicronite’s reported testing and supporting documentation include:

Test or documentationEvaluation area
ISO 10993-5In vitro cytotoxicity
ISO 13402Surgical and dental hand-instrument resistance to autoclaving, corrosion, and thermal exposure
ASTM F1089Corrosion testing of surgical instruments
Gamma radiation testingStability under gamma sterilization exposure
ASTM F945Titanium-alloy stress-corrosion evaluation using aircraft-engine cleaning materials
ASTM E595Outgassing in a vacuum environment
FDA Device Master FileSupporting information for device regulatory submissions

Contact Dicronite Southwest to discuss applicable test reports, sterilization conditions, and additional testing requirements.

Biocompatibility and sterilization suitability must be evaluated for the finished device and its intended use.

Applications

Example medical applications

  • Dental Equipment

    Lubrication of dental air-drill gears and bearings to reduce friction and wear, with the aim of extending component life and reducing maintenance.

  • Surgical Instruments

    Hinge and pivot lubrication to support smooth actuation, precise movement, and reduced wear.

  • Orthopedic Fixation Hardware

    Anti-galling treatment for titanium and stainless steel mating components.

  • Medical Imaging Equipment

    Lubrication of bearings, magnetic motion components, and linear guides operating in vacuum environments.

  • Guidewires, Cannulae, and Endosurgical Tools

    Treatment of sliding interfaces to help reduce insertion force and minimize galling.

  • Ophthalmic Biopsy Devices

    Lubrication between concentric sampling tubes to help prevent galling and reduce actuation force.

Contact Dicronite Southwest

Discuss your medical-device application

Contact Dicronite Southwest to review your component materials, mechanical tolerances, operating conditions, and testing requirements.

Dicronite® Southwest

Request a Dicronite® WS₂ Coating Quote

Send us your project details so we can evaluate your requirements and prepare a quote.

Sending drawings securely

Dicronite® Southwest is CMMC compliant. Please do not attach drawings to this form. Send drawings, including ITAR and CUI technical data, by email to rfq@secure.dicronitesouthwest.com. Email to this secure address is routed into our PreVeil encrypted environment.

Submit this form first so our team can add your email address, or your company's email domain, to the approved list for the secure inbox. Email from addresses that are not on the list cannot be received.

If your company already uses PreVeil, you can also send drawings to us directly through PreVeil.

Email Drawings Securely

Loading the quote form…

Thank you. Your quote request has been received.

Our team will review your project details and follow up by email.