Case study · Roller chain

Chain Wear Reduction

Less Wear. Longer Service Life. Reduced Maintenance.

A major roller chain manufacturer tested Dicronite® dry lubrication alongside a heavy-duty wet lubricant to evaluate chain wear and maintenance requirements. Compared with wet lubrication alone, the combination produced 42% less average chain elongation and 42% fewer dry joints, with up to 90% less chain wear in the best case.

798 ft/min Dicronite® + HD-4 132 hours under load 533 lb per strand
Dicronite®-treated jointsChain plates
  • 42% Less average chain elongation Compared with the wet lubricant alone.
  • 42% Fewer dry joints Average across the treated chains.
  • 90% Less chain wear, best case Dicronite® combined with HD-4.

The challenge

Reduce chain wear and extend lubrication intervals

The manufacturer wanted to reduce chain wear and extend maintenance lubrication intervals. Longer service life and less downtime would help lower customers’ operating costs and support premium pricing.

Test conditions

Temperature
Ambient
Speed
798 feet per minute
Load
533 pounds per strand of chain
Elongation
Measured at 50 psig
Duration
Scheduled for 150 hours; stopped at 132 hours

The testing

Two groups of chains, side by side

Control group

Wet lubricant alone

Heavy-duty wet lubricant (HD-4) alone.

Dicronite® group

Dicronite® + HD-4

Dicronite dry lubrication combined with HD-4.

Both groups operated at ambient temperature at a speed of 798 feet per minute, under an applied load of 533 pounds per strand of chain. Chain elongation measurements were taken at 50 psig.

132 h

Testing was scheduled for 150 hours but stopped at 132 hours after a control-group chain broke for the second time. Dry joints and chain elongation were evaluated at that point.

The results

Measured against the control group

Compared with the control group, chains treated with Dicronite and HD-4 demonstrated:

  • Average number of dry joints42%fewer
  • Average chain elongation42%less
  • Elongation, best-performing chain from each group51%less
  • Chain wear in the best case90%less

Each bar is the reported reduction, on a scale of 0 to 100%.

The reported benefits included longer chain life, increased gear life, and lower operating temperatures. For the manufacturer, these improvements supported extended maintenance intervals and reduced customer operating costs.

  • Longer chain life
  • Increased gear life
  • Lower operating temperatures
  • Extended maintenance intervals

Applications

Chain-driven machinery in demanding environments

Dicronite dry lubrication is used in chain-driven machinery, including applications involving:

  • Cleanroom, vacuum & inert-gas environments

    Its inert, non-migrating nature supports applications where lubricant migration is a concern.

  • High-temperature environments

    Applications include baking ovens and manufacturing equipment operating at temperatures up to 538°C (1,000°F).

  • Space & radiation-exposure environments

    Its resistance to hard radiation supports use in demanding operating conditions.

Discuss your application

Reduce Wear in Your Chain-Driven Equipment

Contact Dicronite Southwest to discuss your operating conditions, maintenance requirements, and chain lubrication needs.

Dicronite® Southwest

Request a Dicronite® WS₂ Coating Quote

Send us your project details so we can evaluate your requirements and prepare a quote.

Sending drawings securely

Dicronite® Southwest is CMMC compliant. Please do not attach drawings to this form. Send drawings, including ITAR and CUI technical data, by email to rfq@secure.dicronitesouthwest.com. Email to this secure address is routed into our PreVeil encrypted environment.

Submit this form first so our team can add your email address, or your company's email domain, to the approved list for the secure inbox. Email from addresses that are not on the list cannot be received.

If your company already uses PreVeil, you can also send drawings to us directly through PreVeil.

Email Drawings Securely

Loading the quote form…

Thank you. Your quote request has been received.

Our team will review your project details and follow up by email.